1. Make sure that your router is connected to the Internet.2. Login to your router with telnet or ssh.3. Type the following command to download stock firmware V2.04 for DIR-300 B1.Code:wget -O /var/firmware _FW204WWB01.bin
ROOter has been available since April 2013 and has proved to be a popular download for improving routers. In 2016 there were 252,000 firmware downloads of ROOter images. Since its inception there have been over 500,000 firmware downloads of all the different ROOter versions.
ralink - rt3050 firmware download
Download and update firmware for products: debian 11 firmware ralink, firmware ralink 0 36 wheezy 1 all deb, debian 9 firmware ralink, firmware ralink v1 3a0 43 rpi6 all deb, debian 10 firmware ralink, .
How to download and update firmware ralink rt3050f firmware Download ZTE firmware update gadget is very important as many of its owners regularly make the upgrades in order to make their gadgets to function ...
How to download and update firmware ralink rt3050f firmware Samsung firmware : being one of the leading producers of electronic gadgets including mobile phones, Samsung very often releases Stock Firmware ROM ...
How to download and update firmware ralink rt3050f firmware Download digital photo Cameras firmware : most of the camera s internal parts including lenses, autofocus, LCD screens etc. are controlled by ...
U-Boot 1.1.3 (Apr 11 2013 - 00:10:51) Board: Ralink APSoC DRAM: 32 MBrelocate_code Pointer at: 81fb4000****************************** Software System Reset Occurred******************************spi_wait_nsec: 42 spi device id: 7f 9d 46 7f 9d (9d467f9d)Warning: un-recognized chip ID, please update bootloader!raspi_read: from:30000 len:1000 .*** Warning - bad CRC, using default environment ============================================ Ralink UBoot Version: 3.6.0.0 -------------------------------------------- ASIC 5350_MP (Port5None) DRAM_CONF_FROM: Boot-Strapping DRAM_TYPE: SDRAM DRAM_SIZE: 256 MbitsDRAM_WIDTH: 16 bits DRAM_TOTAL_WIDTH: 16 bitsTOTAL_MEMORY_SIZE: 32 MBytesFlash component: SPI Flash Date:Apr 11 2013 Time:00:10:51============================================ icache: sets:256, ways:4, linesz:32 ,total:32768dcache: sets:128, ways:4, linesz:32 ,total:16384 ##### The CPU freq = 360 MHZ #### estimate memory size =32 Mbytes Please choose the operation: 1: Load system code to SDRAM via TFTP. 2: Load system code then write to Flash via TFTP. 3: Boot system code via Flash (default). 4: Entr boot command line interface. 7: Load Boot Loader code then write to Flash via Serial. 9: Load Boot Loader code then write to Flash via TFTP. 0 3: System Boot system code via Flash.## Booting image at bc050000 ... raspi_read: from:50000 len:40 . Image Name: MIPS OpenWrt Linux-4.14.63 Created: 2018-08-16 7:51:15 UTC Image Type: MIPS Linux Kernel Image (lzma compressed) Data Size: 1370091 Bytes = 1.3 MB Load Address: 80000000 Entry Point: 80000000raspi_read: from:50040 len:14e7eb ..................... Verifying Checksum ... OK Uncompressing Kernel Image ... OK No initrd ## Transferring control to Linux (at address 80000000) ...## Giving linux memsize in MB, 32 Starting kernel ... [ 0.000000] Linux version 4.14.63 (buildbot@builds-03.infra.lede-project.org) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r7102-3f3a2c9)) #0 Thu Aug 16 07:51:15 2018[ 0.000000] SoC Type: Ralink RT5350 id:1 rev:3[ 0.000000] bootconsole [early0] enabled[ 0.000000] CPU0 revision is: 0001964c (MIPS 24KEc)[ 0.000000] MIPS: machine is A5-V11[ 0.000000] Determined physical RAM map:[ 0.000000] memory: 02000000 @ 00000000 (usable)[ 0.000000] Initrd not found or empty - disabling initrd[ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.[ 0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes[ 0.000000] Zone ranges:[ 0.000000] Normal [mem 0x0000000000000000-0x0000000001ffffff][ 0.000000] Movable zone start for each node[ 0.000000] Early memory node ranges[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000001ffffff][ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000001ffffff][ 0.000000] random: get_random_bytes called from 0x803ee72c with crng_init=0[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 8128[ 0.000000] Kernel command line: console=ttyS0,57600 rootfstype=squashfs,jffs2[ 0.000000] PID hash table entries: 128 (order: -3, 512 bytes)[ 0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)[ 0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)[ 0.000000] Writing ErrCtl register=0000ad60[ 0.000000] Readback ErrCtl register=0000ad60[ 0.000000] Memory: 27960K/32768K available (3419K kernel code, 172K rwdata, 424K rodata, 200K init, 210K bss, 4808K reserved, 0K cma-reserved)[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1[ 0.000000] NR_IRQS: 256[ 0.000000] CPU Clock: 360MHz[ 0.000000] clocksource: systick: mask: 0xffff max_cycles: 0xffff, max_idle_ns: 583261500 ns[ 0.000000] systick: running - mult: 214748, shift: 32[ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 10618113593 ns[ 0.000016] sched_clock: 32 bits at 180MHz, resolution 5ns, wraps every 11930464253ns[ 0.015713] Calibrating delay loop... 239.61 BogoMIPS (lpj=1198080)[ 0.098021] pid_max: default: 32768 minimum: 301[ 0.107600] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)[ 0.120714] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)[ 0.143473] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns[ 0.163028] futex hash table entries: 256 (order: -1, 3072 bytes)[ 0.175291] pinctrl core: initialized pinctrl subsystem[ 0.188503] NET: Registered protocol family 16[ 0.207011] Can't analyze schedule() prologue at 80352ab0[ 0.261962] rt2880_gpio 10000600.gpio: registering 22 gpios[ 0.273109] rt2880_gpio 10000600.gpio: registering 22 irq handlers[ 0.286095] rt2880_gpio 10000660.gpio: registering 6 gpios[ 0.297062] rt2880_gpio 10000660.gpio: registering 6 irq handlers[ 0.320369] clocksource: Switched to clocksource MIPS[ 0.332573] NET: Registered protocol family 2[ 0.343111] TCP established hash table entries: 1024 (order: 0, 4096 bytes)[ 0.356993] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)[ 0.369564] TCP: Hash tables configured (established 1024 bind 1024)[ 0.382570] UDP hash table entries: 256 (order: 0, 4096 bytes)[ 0.394211] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)[ 0.407141] NET: Registered protocol family 1[ 0.422645] rt-timer 10000100.timer: maximum frequency is 3662Hz[ 0.436201] Crashlog allocated RAM at address 0x1f00000[ 0.451287] workingset: timestamp_bits=30 max_order=13 bucket_order=0[ 0.474764] squashfs: version 4.0 (2009/01/31) Phillip Lougher[ 0.486361] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.[ 0.534180] io scheduler noop registered[ 0.541954] io scheduler deadline registered (default)[ 0.554102] gpio-export gpio_export: 2 gpio(s) exported[ 0.564998] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled[ 0.583700] console [ttyS0] disabled[ 0.590886] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 20, base_baud = 2500000) is a Palmchip BK-3103[ 0.610610] console [ttyS0] enabled[ 0.610610] console [ttyS0] enabled[ 0.624383] bootconsole [early0] disabled[ 0.624383] bootconsole [early0] disabled[ 0.641354] cacheinfo: Failed to find cpu0 device node[ 0.651729] cacheinfo: Unable to detect cache hierarchy for CPU 0[ 0.684299] spi spi0.0: force spi mode3[ 0.693469] m25p80 spi0.0: pm25lq032 (4096 Kbytes)[ 0.703228] 4 fixed-partitions partitions found on MTD device spi0.0[ 0.715949] Creating 4 MTD partitions on "spi0.0":[ 0.725590] 0x000000000000-0x000000030000 : "u-boot"[ 0.737406] 0x000000030000-0x000000040000 : "u-boot-env"[ 0.749940] 0x000000040000-0x000000050000 : "factory"[ 0.762098] 0x000000050000-0x000000400000 : "firmware"[ 1.239968] 2 uimage-fw partitions found on MTD device firmware[ 1.251944] 0x000000050000-0x00000019e82b : "kernel"[ 1.263759] 0x00000019e82b-0x000000400000 : "rootfs"[ 1.275451] mtd: device 5 (rootfs) set to be root filesystem[ 1.291026] 1 squashfs-split partitions found on MTD device rootfs[ 1.303535] 0x0000003cf000-0x000000400000 : "rootfs_data"[ 1.317208] libphy: Fixed MDIO Bus: probed[ 1.334976] rt3050-esw 10110000.esw: link changed 0x00[ 1.348351] mtk_soc_eth 10100000.ethernet eth0: mediatek frame engine at 0xb0100000, irq 5[ 1.365970] rt2880_wdt 10000120.watchdog: Initialized[ 1.378663] NET: Registered protocol family 10[ 1.397621] Segment Routing with IPv6[ 1.405290] NET: Registered protocol family 17[ 1.414378] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.[ 1.440310] 8021q: 802.1Q VLAN Support v1.8[ 1.468752] VFS: Mounted root (squashfs filesystem) readonly on device 31:5.[ 1.485086] Freeing unused kernel memory: 200K[ 1.494070] This architecture does not have kernel memory protection.[ 2.630413] random: fast init done[ 3.214858] init: Console is alive[ 3.222397] init: - watchdog -[ 5.181910] kmodloader: loading kernel modules from /etc/modules-boot.d/*[ 5.496752] usbcore: registered new interface driver usbfs[ 5.508082] usbcore: registered new interface driver hub[ 5.519102] usbcore: registered new device driver usb[ 5.541673] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver[ 5.557869] ehci-platform: EHCI generic platform driver[ 5.579068] phy phy-usbphy.0: remote usb device wakeup disabled[ 5.590947] phy phy-usbphy.0: UTMI 16bit 30MHz[ 5.599835] ehci-platform 101c0000.ehci: EHCI Host Controller[ 5.611428] ehci-platform 101c0000.ehci: new USB bus registered, assigned bus number 1[ 5.627552] ehci-platform 101c0000.ehci: irq 26, io mem 0x101c0000[ 5.660454] ehci-platform 101c0000.ehci: USB 2.0 started, EHCI 1.00[ 5.675225] hub 1-0:1.0: USB hub found[ 5.684026] hub 1-0:1.0: 1 port detected[ 5.698782] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver[ 5.714247] ohci-platform: OHCI generic platform driver[ 5.725317] ohci-platform 101c1000.ohci: Generic Platform OHCI controller[ 5.739075] ohci-platform 101c1000.ohci: new USB bus registered, assigned bus number 2[ 5.755170] ohci-platform 101c1000.ohci: irq 26, io mem 0x101c1000[ 5.836363] hub 2-0:1.0: USB hub found[ 5.845069] hub 2-0:1.0: 1 port detected[ 5.973164] kmodloader: done loading kernel modules from /etc/modules-boot.d/*[ 5.998649] init: - preinit -[ 7.930772] rt3050-esw 10110000.esw: link changed 0x00Press the [f] key and hit [enter] to enter failsafe modePress the [1], [2], [3] or [4] key and hit [enter] to select the debug[ 8.259245] random: procd: uninitialized urandom read (4 bytes read) level[ 11.684183] jffs2: notice: (362) jffs2_build_xattr_subsystem: complete building xattr subsystem, 18 of xdatum (3 unchecked, 15 orphan) and 22 of xref (15 dead, 0 orphan) found.[ 11.720093] mount_root: switching to jffs2 overlay[ 11.794355] overlayfs: upper fs does not support tmpfile.[ 11.820309] urandom-seed: Seeding with /etc/urandom.seed[ 11.918490] procd: - early -[ 11.924795] procd: - watchdog -[ 13.073976] procd: - watchdog -[ 13.081239] procd: - ubus -[ 13.487129] random: ubusd: uninitialized urandom read (4 bytes read)[ 13.625629] random: ubusd: uninitialized urandom read (4 bytes read)[ 13.639497] random: ubusd: uninitialized urandom read (4 bytes read)[ 13.655360] procd: - init -Please press Enter to activate this console.[ 14.308105] kmodloader: loading kernel modules from /etc/modules.d/*[ 14.334265] ip6_tables: (C) 2000-2006 Netfilter Core Team[ 14.369237] Loading modules backported from Linux version wt-2017-11-01-0-gfe248fc2c180[ 14.385356] Backport generated by backports.git v4.14-rc2-1-31-g86cf0e5d[ 14.407161] ip_tables: (C) 2000-2006 Netfilter Core Team[ 14.435575] nf_conntrack version 0.5.0 (1024 buckets, 4096 max)[ 14.574540] xt_time: kernel timezone is -0000[ 14.692257] PPP generic driver version 2.4.2[ 14.706631] NET: Registered protocol family 24[ 14.764138] rt2800_wmac 10180000.wmac: loaded eeprom from mtd device "factory"[ 14.778721] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5350, rev 0500 detected[ 14.794257] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5350 detected[ 14.859941] kmodloader: done loading kernel modules from /etc/modules.d/*[ 16.716141] urandom_read: 5 callbacks suppressed[ 16.716157] random: jshn: uninitialized urandom read (4 bytes read)[ 32.165685] br-lan: port 1(eth0) entered blocking state[ 32.176256] br-lan: port 1(eth0) entered disabled state[ 32.187415] device eth0 entered promiscuous mode[ 32.302020] br-lan: port 1(eth0) entered blocking state[ 32.312577] br-lan: port 1(eth0) entered forwarding state[ 32.323842] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready[ 33.190562] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready[ 36.009773] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready[ 40.585070] wlan0: authenticate with 34:ce:00:65:aa:d5[ 40.611016] wlan0: send auth to 34:ce:00:65:aa:d5 (try 1/3)[ 40.657908] wlan0: send auth to 34:ce:00:65:aa:d5 (try 2/3)[ 40.701981] wlan0: send auth to 34:ce:00:65:aa:d5 (try 3/3)[ 40.733323] wlan0: authentication with 34:ce:00:65:aa:d5 timed out[ 42.102938] wlan0: authenticate with 34:ce:00:65:aa:d5[ 42.115859] wlan0: send auth to 34:ce:00:65:aa:d5 (try 1/3)[ 42.130036] wlan0: authenticated[ 42.140557] wlan0: associate with 34:ce:00:65:aa:d5 (try 1/3)[ 42.155641] wlan0: RX AssocResp from 34:ce:00:65:aa:d5 (capab=0x431 status=0 aid=2)[ 42.171545] wlan0: associated[ 42.199100] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready[ 106.060582] random: crng init done 2ff7e9595c
Comments